Contact us, we will be pleased to advise you.

Europe's most comprehensive online shop for power generators

Himoinsa  |  SKU: SEV-00536
Reduced by 15%

Power generator HIMOINSA HFW-160 T5 IVECO 2 open

Selling price €25.379,50 Normal price €29.894,11
VAT included. Shipping will be calculated at checkout.

Power generator HIMOINSA HFW-160 T5 IVECO 2 open is not in stock and will be shipped as soon as available again.

Delivery time: approx. 16 weeks


Collection possible from warehouse Fabrikstr. 1

Collection date after consultation

Questions to the product?

Shipping Information

Shipping costs are calculated based on the weight and the destination country. A shipping cost calculator for the entire contents of the shopping cart is available here on the product page (below the price information).

We ship up to approx. 30 kg with parcel service. We ship items with higher weight using general cargo freight forwarding or, in the case of large units, by direct transport.

Please contact us if you have special delivery requirements.

HIMOINSA · Industrial diesel generator · Stage 2

HIMOINSA HFW-160 T5 Stage 2 open

The HIMOINSA HFW-160 T5 Stage 2 is an open-frame, three-phase industrial diesel generator with 160 kVA (127 kW) prime power and 175 kVA (140 kW) emergency standby power for the documented older configuration. The liquid-cooled FPT / IVECO NEF67TM3A six-cylinder diesel engine operates at 1,500 rpm. A three-phase alternator with electronic AVR supplies 400/230 V at 50 Hz. Fuel tank capacity is 250 litres.

Key specifications

Prime power
160 kVA
127 kW PRP
Standby power
175 kVA
140 kW ESP
Engine
FPT / IVECO
NEF67TM3A
Voltage
400/230 V
50 Hz, three-phase
Fuel tank
250 L
Diesel
Listed weight
1,450 kg
Open skid

Advantages and equipment

✓
Industrial FPT / IVECO engine
Liquid-cooled six-cylinder diesel engine
✓
Three-phase electricity
400/230 V at 50 Hz for professionally designed industrial distribution
✓
AVR regulation
Electronic alternator voltage regulation
✓
Electric starting
Electric starter and control panel
✓
Service-accessible design
Open skid for installations with suitable air supply and ventilation
✓
Project-specific output
Terminals, switchgear and protection defined by the ordered equipment

Typical applications

This open-frame Stage 2 generator is designed for stationary industry, commercial plant rooms and engineered standby systems in locations where its emission category is legally permitted. Its output must be matched to the actual starting currents, phase loads, duty cycle and distribution design.

Industrial facilities
Power generation for suitably designed business installations
Plant rooms
Permanent or project-installed electrical generation with adequate ventilation
Standby systems
Interlocked utility changeover and safe electrical separation
Commercial infrastructure
Industrial electricity supply based on an engineered protection concept

160 kVA industrial diesel generator for planned standby power

With 160 kVA prime power, the HIMOINSA HFW-160 T5 can supply suitable varying-load industrial installations when the manufacturer operating conditions are met. The distinct 175 kVA ESP rating applies only to emergency standby duty and must not be treated as unrestricted continuous output.

The robust Stage 2 diesel engine and 250-litre fuel tank suit stationary sites. Alternator selection, switchgear, connection terminals and remote-control features depend on the exact ordered version. Confirm the serial-specific equipment when arranging an industrial or building standby installation.

Technical highlights

Prime / emergency output
160 kVA PRP and 175 kVA ESP
Industrial engine
FPT / IVECO NEF67TM3A, 1,500 rpm
Three-phase generation
400/230 V, 50 Hz, AVR regulation
Fuel storage
Integrated 250-litre diesel tank

Generator selection, grid protection and emissions

PRP and ESP: Prime power is defined by the manufacturer's loading conditions; standby output is restricted to the applicable emergency duty. The final rating depends on the generator configuration.

Electrical integration: Output protection, earthing, cable sizing and suitable mains transfer switching must be engineered by qualified electrical professionals. A fixed selection of power outlets must not be presumed.

Stage 2 emissions: This older emissions category may not be allowed for every installation or operating location. Verify the applicable permission before purchase.

The 160/175 kVA values refer to the documented older Stage 2 configuration. The exact alternator model and legal suitability require confirmation.

Technical specifications

Power and electrical output
Prime power PRP160 kVA / 127 kW
Standby rating ESP175 kVA / 140 kW
Output voltage400/230 V
Frequency50 Hz
PhasesThree-phase
Power factorcos φ 0.8
Engine
ManufacturerFPT / IVECO
ModelNEF67TM3A
Engine typeSix-cylinder four-stroke turbocharged diesel
Displacement6.7 L
CoolingLiquid-cooled
Rated speed1,500 rpm
Starting12 V electric start
EmissionsStage 2
Alternator and voltage regulation
Alternator manufacturerActual configuration to be confirmed
Alternator typeThree-phase generator
RegulationElectronic AVR
Output400/230 V at 50 Hz
ConfigurationAlternator type and winding are order-dependent
Fuel and operating conditions
FuelDiesel
Tank capacity250 L
Listed reference runtimeApproximately 9 hours; dependent on load
UseStationary industrial and professionally engineered standby applications
Electrical connections and controls
Power output connectionTerminal output; confirm switchboard configuration
Control panelDepends on ordered generator equipment
Circuit protectionSite-specific circuit breakers and earth leakage protection
Mains changeoverSeparate, safely interlocked transfer switch to be specified
Remote start / ATSOptional depending on control and installation
Dimensions, enclosure and weight
VersionOpen industrial generator skid
Listed weight1,450 kg
Engine layout6 cylinders in line
Fuel tank250 L
Further equipment and compliance notes
Product variantHFW-160 T5 Stage 2 open
Engine referenceNEF67TM3A
Prime / standby dutyManufacturer restrictions and operating conditions apply
Alternator verificationFinal alternator and ratings must match the exact model and serial number
EmissionsStage 2 approval must be checked for the intended site

Planning industrial or standby electricity generation?

SEV can help you specify generator capacity, control panels, output connections, mains changeover and suitable protective measures.

Payment & Security

Payment methods:

  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • EPS
  • Google Pay
  • iDEAL Wero
  • Maestro
  • Mastercard
  • MobilePay
  • PayPal
  • Satispay
  • Shop Pay
  • Twint
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store any credit card details and do not have access to your credit card details.