Generator HIMOINSA HYW - 25 T5 S5 open version
Generator HIMOINSA HYW - 25 T5 S5 open version is not in stock and will be shipped as soon as available again.
Delivery time: approx. 16 weeks
Availability for pickups could not be loaded
Questions to the product?
Questions to the product?
Shipping Information
Shipping Information
Shipping costs are calculated based on the weight and the destination country. A shipping cost calculator for the entire contents of the shopping cart is available here on the product page (below the price information).
We ship up to approx. 30 kg with parcel service. We ship items with higher weight using general cargo freight forwarding or, in the case of large units, by direct transport.
Please contact us if you have special delivery requirements.
Generator HIMOINSA HYW - 25 T5 S5 open version
HYW - 25 T5 S5
Engine specifications 1,500
Three-phase generator Pole: 4 Electrical system Electrical panel for control and circuit breakers, with measuring devices and control center (according to requirements and configuration) Version Fixed Standard Emergency stop switch Plant data EXHAUST SYSTEM Maximum temperature exhaust gas operation: 450 QUANTITY OF AIR REQUIRED Maximum air flow for combustion: 122.32 COMMISSIONING SYSTEM Starting power: 1.7 FUEL SYSTEM Fuel type: diesel Dimensions Length: 1,700
Rated power kVA: 22 prp ; 25 standby
Manufacturer: YANMAR
Model: 4TNV86 CTIHR
Engine type: Diesel four-stroke
Type of injection: Direct
Type of intake: Turbocharger
Cylinder, number and arrangement: 4 - L
Diameter x travel: 86 x 90
Total displacement: 1,091
Cooling system: coolant
Specifications engine oil: SAE 3 class 10W30 / API CJ-4, ACEA E6
Compression ratio: 19,
Fuel consumption standby mode: 6.03
Fuel consumption 100% PRP: 5.29
Fuel consumption 75% PRP: 3.76
Fuel consumption 50% PRP: 2.84
Oil consumption under full load: 0 ,27
Maximum oil quantity: 7.4
Total quantity of coolant: 5.8
Regulator type mechanical
Air filter type dry
Inner diameter outlet exhaust pipe: 34.7
Diesel engines
Four-stroke engine
Water-cooled
Electric starter 12V
Cooler with pressure fan
Filter separator (stand visible)
Mechanical control
Dry air filter
Protection devices for hot parts
Protection devices for moving parts
Connection type (standard): Star - series
Coupling type: S-4 7.5"
Insulation protection class: Class H
Mechanical protection class (according to IEC-34-5) : IP23
Control system: Self-excited, without brushes
Voltage regulator: A.V.R. (Electronic)
Type of holder: Single bearing type
Clutch system: Flexible disc
Type of cover: Standard (vacuum impregnation)
Four-pole thermomagnetic circuit breaker
Adjustable differential protection (time and sensitivity), included as standard in the M5 and AS5 panels with thermomagnetic circuit breaker
Battery charger (included in units with automatic switch panel)
Heating resistor (included as standard in units with automatic switch panel)
Alternator for charging batteries with earth connection
Installed starter battery(s) (including cable and holder)
Electrical ground connection with connection provided for deep earth electrode (depth earth electrode not included)
Battery disconnect switch optional
Steel housing
Vibration damper
Fuel tank integrated into the housing
Flow timer fuel level
Drainage cap tank
Steel silencer with -15db(A)
Fuel Transfer pump Optional
High performance steel silencer with -35db(A) Optional
Flow rate exhaust gas operation: 5.36
Maximum permissible back pressure: 1300
Air flow fan motor: 0.987
Air flow fan alternator: 0.11
Starting power: 2.31
Recommended battery: 60
Auxiliary voltage: 12
Fuel tank: 76
Height: 1,286
Width: 620
Weight with liquids in radiator and oil pan: 462
Tank capacity: 76
Autonomy: 14 hours
-
Start system
Payment & Security
Payment methods:
Your payment information is processed securely. We do not store any credit card details and do not have access to your credit card details.
