WELDING UNIT SDMO WELDARC 200 C5

Name: WELDING UNIT SDMO WELDARC 200 C5
Brand: SDMO
Price: 1769.24 EUR
Availability: InStock

€1.769,24 €2.537,95

VAT included. Shipping will be calculated at checkout.

WELDING UNIT SDMO WELDARC 200 C5 is not in stock and will be shipped as soon as available again.

Delivery time: approx. 10 weeks

Collection possible from warehouse Fabrikstr. 1

Collection date after consultation

Questions to the product?

Tel.: 07622 / 6971 150

Mail: sev@sev-stromerzeuger.com

Shipping Information

Shipping costs are calculated based on the weight and the destination country. A shipping cost calculator for the entire contents of the shopping cart is available here on the product page (below the price information).

We ship up to approx. 30 kg with parcel service. We ship items with higher weight using general cargo freight forwarding or, in the case of large units, by direct transport.

Please contact us if you have special delivery requirements.

Your legal guarantee rights

LEGAL GUARANTEE Minimum two-year legal guarantee protection for goods sold in the European Union. Consumers can claim their rights under the legal guarantee of conformity, for example if goods: do not match the description; do not function as intended. Sellers are liable for any lack of conformity which existed when the goods were delivered, and which becomes apparent within the legal guarantee period. Sellers in such a situation are required to offer: free repair or free replacement; in some cases, a price reduction or full reimbursement. Some countries have a longer legal guarantee period. For second-hand goods, a shorter period may apply, but not less than one year. For more information on your rights in a specific country, scan the QR code below or ask the seller. europa.eu/youreurope/guarantees What to do if you receive non-conforming goods: 1 Contact the seller as soon as possible to report the issue; 2 Provide proof of purchase, such as a receipt, invoice, or bank statement. Sellers and producers may also offer commercial guarantees, which apply independently from the legal guarantee. For example, you may see this GARAN label representing a commercial guarantee of durability offered by the producer at no additional cost and covering the entire good.

Open the legal guarantee notice on Your Europe

Petrol engine KOHLER CH680 C5 air cooled. Reversing start, alternating current up to 4 kVA, electronic welding current control, motor protection (temperature/oil), operating hours counter, synchronous generator, 1-phase, 2 Schuko sockets 230 volts, simultaneous use as a welding machine and power generator possible. large tank 7.3 liters, continuous running time: 2.8 hours.
STAGE V (2016/1628 EU), this product complies with the new environmental regulations in Europe
Weight: 95kg

REHLKO / SDMO · WELDING GENERATORS

Welding generator SDMO WELDARC 200 C5

The Welding generator SDMO WELDARC 200 C5 combines electrical power generation with arc-welding capability. The following technical specifications include welding output, engine details, available connections and operating data.

Technical specifications

General specifications
Frequency (Hz)	50
Maximum output LTP (kW)	4
Welding current at 35% duty cycle (A)	200
Welding current at 60% duty cycle (A)	170
Output current type	Direct current (DC)
Open-circuit voltage (V)	75
Minimum welding electrode diameter (mm)	1.6
Maximum welding electrode diameter (mm)	4
Guaranteed sound power level Lw(A)	97
Sound pressure at 7 m, dB(A)	69
Engine specifications
Engine manufacturer	Kohler
Engine model	CH 440 C5
Valve configuration	O.H.V.
Starting system	Electric start
Fuel	Unleaded petrol
Runtime (h)	2.8
Fuel consumption (L/h)	2.6
Fuel tank (L)	7.3
Low-oil shutdown	Yes
Displacement (cm³)	429
Oil capacity (L)	1.3
Alternator specifications
Model	Synchronous
Regulation	Mechanical regulation
Protection class	IP 23
Insulation class	H
Connections and control panel
2 connections 230V 10A/16A - overload protection
Dimensions and weight
Length (cm)	81
Width (cm)	55.5
Height (cm)	59
Net weight (kg)	94.5

Welding current, duty cycle and auxiliary electrical output must be considered separately. Follow the manufacturer's instructions and electrical safety requirements. Specification values are taken from the German product description; confirm configuration-specific details with the current manufacturer's documentation.