Contact us, we will be pleased to advise you.

Europe's most comprehensive online shop for power generators

Himoinsa  |  SKU: SEV-00534
Reduced by 21%

Power generator HIMOINSA HFW-135 T5 IVECO 2 soundproof hood

Selling price €31.352,22 Normal price €39.468,78
VAT included. Shipping will be calculated at checkout.

Power generator HIMOINSA HFW-135 T5 IVECO 2 soundproof hood is not in stock and will be shipped as soon as available again.

Delivery time: approx. 16 weeks


Collection possible from warehouse Fabrikstr. 1

Collection date after consultation

Questions to the product?

Shipping Information

Shipping costs are calculated based on the weight and the destination country. A shipping cost calculator for the entire contents of the shopping cart is available here on the product page (below the price information).

We ship up to approx. 30 kg with parcel service. We ship items with higher weight using general cargo freight forwarding or, in the case of large units, by direct transport.

Please contact us if you have special delivery requirements.

HIMOINSA · Industrial diesel generation · Stage 2

HIMOINSA HFW-135 T5 Stage 2 soundproof

The HIMOINSA HFW-135 T5 is a stationary soundproof three-phase diesel generator for industrial and engineered standby applications. It provides 131 kVA prime power (PRP) and 143 kVA emergency standby power (ESP). The FPT/IVECO NEF67TM2A engine operates at 1,500 rpm and drives an AVR-regulated three-phase alternator. Output voltage is 400/230 V at 50 Hz; the fuel tank holds 450 litres.

Key specifications

Prime power
131 kVA
105 kW PRP
Standby power
143 kVA
114 kW ESP
Engine
FPT / IVECO
NEF67TM2A
Alternator
STAMFORD / MECC ALTE (configuration dependent)
Version dependent
Fuel tank
450 L
Diesel
Listed weight
2,362 kg
Soundproof canopy

Advantages and equipment

✓
Industrial FPT/IVECO engine
Liquid cooling, electric start and rated operation at 1,500 rpm
✓
Three-phase electrical output
400/230 V and 50 Hz supply for professionally engineered loads
✓
AVR voltage control
Electronic regulation of the selected alternator
✓
Robust installation
Industrial generator design with maintenance access
✓
Project-specific switchgear
Output terminals and control panel specified in the order
✓
Professional standby integration
Correct utility isolation, transfer switching and protection required

Suitable applications

These stationary HIMOINSA generators can supply industrial plant, commercial equipment, technical infrastructure and appropriately engineered standby installations. Load calculations, motor starting currents, phase imbalance and protective devices must be assessed before connecting equipment.

Industrial facilities
Engineered standby and on-site power for factory applications
Stationary power systems
Configured output, controls and switchboard arrangement
Commercial infrastructure
Electrical generation for suitable critical equipment
Standby operation
Safe utility separation, transfer switching and earthing

HIMOINSA HFW-135 T5 diesel generator for industry and standby power

The 131 kVA PRP industrial generating set is a sound-attenuated enclosure version for stationary projects. Power output should be chosen using the exact alternator and engine configuration rather than relying on the model number alone.

The diesel engine has 6 cylinders and a displacement of 6.7 litres. The 450-litre tank supports planned operating intervals; external fuel systems, transfer switches, outlets and remote controls must be explicitly specified where needed.

Technical highlights

Power output
131 kVA PRP, 143 kVA ESP
Industrial engine
FPT / IVECO NEF67TM2A, Stage 2
Three-phase supply
400/230 V, 50 Hz, AVR
Tank and configuration
450 L diesel tank; soundproof enclosure

Sizing, safety and operating conditions

PRP versus ESP: Prime power is defined for specified variable-load operation. ESP applies to restricted emergency duty and must never be treated as unrestricted continuous output.

Electrical connections: Terminal boards, protective devices, earthing and suitable mains changeover must be designed for the installation. Individual socket outlets are not guaranteed without a defined switchboard specification.

Emission restrictions: Older Stage 2 and Stage 3A configurations can be subject to location-specific approval and emissions limits. Check the relevant installation rules before ordering.

The historic 131/143 kVA ratings apply to the NEF67TM2A version. Confirm alternator configuration and emissions approval before ordering.

Technical specifications

Electrical output and power
Prime power (PRP)131 kVA / 105 kW
Emergency standby power (ESP)143 kVA / 114 kW
Output voltage400/230 V
Frequency50 Hz
Phase configurationThree-phase
Power factorcos φ 0.8
Engine
ManufacturerFPT / IVECO
ModelNEF67TM2A
Engine typeFour-stroke turbocharged diesel
Cylinders6
Displacement6.7 L
Rated speed1,500 rpm
CoolingLiquid-cooled
Starting12 V electric start
Emission categoryStage 2
Alternator and AVR
Alternator manufacturerSTAMFORD / MECC ALTE (configuration dependent)
ModelTo be confirmed for the actual unit
Voltage regulationElectronic AVR
Electrical configurationThree-phase 400/230 V
Fuel and operation
FuelDiesel
Fuel tank450 L
Consumption at 100% PRP29.3 L/h
Runtime reference19 h, depending on load
Engine speed1,500 rpm
Connections and control
Output connectionTerminal output, control-panel configuration to be verified
Control panelInstrumentation and protection subject to the ordered configuration
Emergency transferSeparate engineered transfer switch required for backup supply
Electrical safetyEarthing, overcurrent and residual-current protection must be engineered
Remote start/ATSOptional, depending on panel and order specification
Dimensions and weight
Enclosure typeSoundproof steel canopy
Listed weight2,362 kg
Dimensions L × W × H330 × 120 × 195.6 cm
Sound pressure @ 7 m68 dB(A)
Equipment-specific notes
Product referenceHFW135T5SP2
Variant-specific limitationThe historic 131/143 kVA ratings apply to the NEF67TM2A version. Confirm alternator configuration and emissions approval before ordering.
Emissions/legal useCheck legal permission for the location and operating purpose
Standby connectionMains isolation and protection by qualified electrician

Planning industrial or standby generation?

SEV can help specify the generator set, electrical output, control panel and safe grid changeover for your site.

Payment & Security

Payment methods:

  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • EPS
  • Google Pay
  • iDEAL Wero
  • Maestro
  • Mastercard
  • MobilePay
  • PayPal
  • Satispay
  • Shop Pay
  • Twint
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store any credit card details and do not have access to your credit card details.