Contact us, we will be pleased to advise you.

Europe's most comprehensive online shop for power generators

Himoinsa  |  SKU: SEV-00539
Reduced by 15%

Power generator HIMOINSA HFW-185 T5 IVECO open

Selling price €26.233,61 Normal price €30.870,25
VAT included. Shipping will be calculated at checkout.

Power generator HIMOINSA HFW-185 T5 IVECO open is not in stock and will be shipped as soon as available again.

Delivery time: approx. 16 weeks


Collection possible from warehouse Fabrikstr. 1

Collection date after consultation

Questions to the product?

Shipping Information

Shipping costs are calculated based on the weight and the destination country. A shipping cost calculator for the entire contents of the shopping cart is available here on the product page (below the price information).

We ship up to approx. 30 kg with parcel service. We ship items with higher weight using general cargo freight forwarding or, in the case of large units, by direct transport.

Please contact us if you have special delivery requirements.

HIMOINSA · Industrial diesel generator

HIMOINSA HFW-185 T5 open frame

The HIMOINSA HFW-185 T5 open frame is a stationary three-phase diesel generator for industrial, commercial and professionally engineered standby applications. Its listed prime power is 173 kVA (138 kW) PRP at 400/230 V and 50 Hz. The liquid-cooled FPT / IVECO NEF67TM4 six-cylinder engine operates at 1,500 rpm and drives an electronically AVR-regulated alternator. The fuel tank holds 250 litres; the actual alternator and permitted duty require confirmation.

Key specifications

Prime power
173 kVA
138 kW PRP
Engine
FPT / IVECO
NEF67TM4
Alternator
Three-phase
AVR; version to verify
Fuel tank
250 L
Diesel
Listed weight
1,493 kg
Open skid

Advantages and equipment

✓
Industrial diesel drive
FPT/IVECO six-cylinder, liquid cooling and electric start
✓
Three-phase power
400/230 V at 50 Hz for properly designed distribution
✓
Electronic AVR
Voltage regulation according to alternator configuration
✓
Heavy-duty construction
Professional stationary installation with maintenance access
✓
Switchboard-specific output
Terminal connection and safety equipment depend on the project
✓
Engineered standby electricity
Mains isolation and electrical protection must be selected

Typical applications

These generators suit suitably planned industrial facilities, commercial infrastructure, technical plant rooms and stationary standby applications. Load profiles, motor starting currents, phase balance, ventilation, earthing and the applicable emissions permission should be checked before commissioning.

Industry and commerce
Fixed installations and industrial machines
Technical infrastructure
Engineered power supply and site switchboards
Standby generation
Safe, interlocked transfer from utility supply
Project-specific installations
Electrical output and configuration matched to real loads

173 kVA industrial diesel generator HFW-185 T5

The 173 kVA PRP rating belongs to the listed open frame configuration. The open-frame layout is designed for suitable machinery and plant rooms. Prime-power operation must comply with the manufacturer's duty profile.

The generator uses a 250-litre tank and a FPT/IVECO NEF67TM4 diesel engine. Alternator make, standby duty, electrical protection, switchgear and optional remote controls must be verified for the actual serial-numbered generator.

Technical highlights

Prime output
173 kVA / 138 kW PRP
FPT/IVECO engine
NEF67TM4, six cylinders, 1,500 rpm
Regulated electricity
400/230 V, 50 Hz, AVR; alternator variant to verify
Tank and enclosure
250 L, open frame

Sizing and installation requirements

Prime vs standby ratings: PRP is the manufacturer-defined variable-load duty. An ESP figure must only be used where the exact generator configuration documents it, and must not be treated as unrestricted continuous power.

Electrical connection: Terminal output, switchboard, cable sizing, transfer switching and overcurrent / personnel protection must be configured by competent electricians. Standard outlet sets are not automatically included.

Emissions and legal use: Stage 2 and Stage 3A or historically supplied engines can have installation-specific restrictions. Confirm legal permission at the intended site.

This open-frame version is recorded as 173 kVA PRP. Other current HFW-185 variants are rated at 174 kVA; the specific standby rating, emissions category and alternator are not established for this historical machine.

Technical specifications

Electrical output and power
Prime power (PRP)173 kVA / 138 kW
Standby power (ESP)Not confirmed for this exact configuration
Output voltage400/230 V
Frequency50 Hz
Phase configurationThree-phase
Power factor0.8
Diesel engine
ManufacturerFPT / IVECO
Engine modelNEF67TM4
TypeFour-stroke industrial diesel engine
Cylinders6
Displacement6.7 litres
CoolingLiquid-cooled
Nominal speed1,500 rpm
Starting systemElectric start
Emission stageUnconfirmed for this version
Alternator and voltage regulation
Alternator manufacturerTo be confirmed from the actual unit
Alternator modelDepends on the ordered generator configuration
Voltage regulationElectronic AVR
Electrical outputThree-phase 400/230 V, 50 Hz
ConstructionThree-phase synchronous alternator
Fuel tank and operation
FuelDiesel
Tank capacity250 L
Operating dutyDepends on PRP and the actual machine configuration
Full-load fuel useNot reliably specified for this variant
Connections and controls
Output connectionTerminals and controls depend on the purchased switchboard
Control panelSpecified by project and order
Electrical protectionEarth fault and overcurrent protection must suit the installation
Grid changeoverInterlocked mains changeover required for building backup
Remote start / ATSOptional; check the order
Dimensions and weight
EnclosureOpen skid frame
Listed weight1,493 kg
Tank capacity250 L
Physical dimensionsNot confirmed for the exact product version
Further technical data and verification
Article codeHFW185T5OS
Configuration caveatThis open-frame version is recorded as 173 kVA PRP. Other current HFW-185 variants are rated at 174 kVA; the specific standby rating, emissions category and alternator are not established for this historical machine.
On-site complianceVerify emissions permissions, earthing and protective measures
Required documentationUse the datasheet or serial-specific equipment specification before final approval

Planning stationary power generation?

SEV supports load sizing, selecting the correct industrial generator, switchgear, mains changeover and safety measures for each project.

Payment & Security

Payment methods:

  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • EPS
  • Google Pay
  • iDEAL Wero
  • Maestro
  • Mastercard
  • MobilePay
  • PayPal
  • Satispay
  • Shop Pay
  • Twint
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store any credit card details and do not have access to your credit card details.